Einrichtung des eBeam Systems

• Setting up your USB system • Unscrew the battery cap from the back of the Interactive Stylus and place one AA battery inside. Be sure to insert the battery's positive (+) end first and that the battery cap is replaced tightly. • Insert the small end of the USB cable into the mini-USB port on the back of the eBeam receiver. • Place the receiver at a right angle in any corner of your whiteboard. Press firmly to make sure it is secure. • Connect the larger end of the USB cable to the USB port on your computer. • Connect your digital projector to your computer with a VGA monitor cable and turn on the projector. • Aim the projector at the whiteboard. The projected image area must not overlap the eBeam receiver. • Start calibrating with the eBeam Stylus, tapping each of the nine targets displayed by your projector. Be sure to start with the top-left target. • Please refer to the index if you need help with Bluetooth installation